Choose to add interfaces, if not, reinstall microwin.
Method:
1. 64 bits of WIN7 flagship Edition
2. Never installed S7200 software.
Direct Installation Method of STEP7 MicroWIN V4 SP9:
1. Create a new text document and copy the following code. Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE Software SIEMENS MicroSystems Common Update 320] [HKEY_LOCAL_MACHINE Software\ SIEMENS MicroSystems Common Toolbox Components] “CountLibord=00001
2. Save this text document as “Install Patch. REG” (see how to create the method in detail). REG method can be easily found on the Internet.
3. Double-click this “Install Patch. REG” file to import the registry.
4. Run the decompressed setup.exe to install STEP7-MicroWIN_V4.0 SP9 directly.
The box appears after installation: click OK.
5. Changing Chinese Interface
Select “TOOLS” in the menu bar and “Options” at the bottom. There is “general” on the left side of the interface. Click on it to appear “Language” on the right where you can choose the language. After selecting, the software needs to be restarted.
6. There is no helpful information in operation (verifying the pop-up box of Step 4). The solutions are as follows:
If it’s a win7-64-bit system, I suggest you download a Windows 6.1-KB917607-x64.msu, which is necessary to open the help file in the software under the win7-64-bit system, otherwise you will find that if you need help in the software after installing s9, you can’t open it. (Because Windows 6.1-KB917607-x64.msu is available in previous systems, but not in win7 and later systems, Microsoft feels it should be eliminated, but now it can install itself.) Double-click to run Windows 6.1-KB917607-x64, and then open the software will help.
PLC ONE 