- ARM9 high-speed Microprocessor and super large programmable FPGA
- Real time multitask control technology and hardware interpolation technology
- 10.4″ Inch real color display screen, Friendly and easily operation interface,
- Supporting English language ;
- All Photovoltaic isolation control, super large anti-interface ability;
- Large storage space process file: 64M, demand complicated/large program running and processing
- Plasma /flame controller can control 2 step/servo motor , Also support 2 extra axis synchronization for gantry type machine
- Graphic library: convenient for customer fast cutting ;
- Graphic real time modification function, supporting figure rotation, correction and mirror ,array etc;
- Support preheating, perforating, automatic corner acceleration and deceleration ;
- Break point recovery function
- USB communication , directly read file by U disk
- support most of CAM software ,like STARCAM , FASTCAM
Digital Input:
- Channel: 16 ,All Photovoltaic isolation
- Input Voltage: 5-24V DC
- High Level>4.5V
- Low Level<1.0V
- Isolation voltage: 2500V DC
Pulse output:
- Channel: 4 Axis Pulse, 4 axis direction, All photovoltaicisolation(X Y axis and gantry X2 Y2 axis)
- Maximum pulse frequency: 2MHz
- Output type: 5Vdifferential output
- Output mode: Pulse +direction or pulse + pulse
Digital Output:
- Output Channel: 16, All photovoltaic isolation
- Output type: NPN open-collectorout put 12-24V DC, Max current 100mA
PLC ONE 