Select the PLC below the file in OP320, you can see there are different types of PLC omron good need to set the corresponding parameters in it, you can download.

The general method is: mov instruction. For example: LD M8000 MOV C10 D2 Then use the text to monitor the value of D2. Since it seems that some text can't display the current value of C or T directly, it becomes a habit later that all C and T are replaced by D, and it … Continue reading Text op320-a how to display mitsubishi PLC program inside the count

The edit menu on the right has a vector text that you can click on to resize the text.

The serial port that comes with the computer tries serial port if can the problem still is on the line

Click on a register widget and there is a Settings data in it

Unlike the universal RS232, the universal RS232 is (2,3,5) to (3,2,5), and the cable has to be connected to seven corners at each end. The correspondence is (2,3,5,7) to (3,2,5,7).

The reasons for op320 version 6.5z are as follows: 1: communication with slave station (PLC or instrument) is interrupted, it is always in the connected state, it cannot carry out other operations, the key will not work. 2: configuration from the station PLC or register address error, cannot read correctly, the results as above!

No, it can only be downloaded.

Xinjie does not possess the TP320 model. Among all the TP series, the smallest one is the TP460 series, 320, which can only be a text display. The specific model is the OP320 series. The text editing software cannot be used casually. It is based on the text display. The hardware comes, the exact hardware … Continue reading What is the difference between text display MD240 and OP320?