❤【Introduction】- OP320-A is a small man-machine interface, mainly used with various kinds of PLC (or intelligent controller with communication port) ❤【Function】- Communication protocol and screen data are downloaded to the display without PLC writing communication program. It has password protection, has alarm list function, line by line real-time display current alarm information. With background light … Continue reading OP320 – A 3.7 inch Text Display HMI Support S485/RS232 Communication Port Mainly Used with PLC

Select the PLC below the file in OP320, you can see there are different types of PLC omron good need to set the corresponding parameters in it, you can download.

The general method is: mov instruction. For example: LD M8000 MOV C10 D2 Then use the text to monitor the value of D2. Since it seems that some text can't display the current value of C or T directly, it becomes a habit later that all C and T are replaced by D, and it … Continue reading Text op320-a how to display mitsubishi PLC program inside the count

The edit menu on the right has a vector text that you can click on to resize the text.

The serial port that comes with the computer tries serial port if can the problem still is on the line

Click on a register widget and there is a Settings data in it

Unlike the universal RS232, the universal RS232 is (2,3,5) to (3,2,5), and the cable has to be connected to seven corners at each end. The correspondence is (2,3,5,7) to (3,2,5,7).

The reasons for op320 version 6.5z are as follows: 1: communication with slave station (PLC or instrument) is interrupted, it is always in the connected state, it cannot carry out other operations, the key will not work. 2: configuration from the station PLC or register address error, cannot read correctly, the results as above!

No, it can only be downloaded.